Color distribution
Description
Injection molded parts have inconsistent color, that is, there is bias differences, colored streaks or patches.
Preview
Causes
|
Possible cause
|
Recommendations to resolve
|
Injection molding machine
|
Pigments mixed in cylinder of injection moulding machine not inadequate.
|
1.Increase the back pressure.
|
2.Reduce the injection cylinder temperature of plastic for better mixing.
|
Plastic
|
1. Pigment not evenly covered with the plastic particles.
|
lubricant used before injection mixed with plastic.
|
2.Colorant particles are too thick.
|
Polishing dyes to obtain the powder.
|
3.Color masterbatch concentration level is too low.
|
Use the correct concentration of colorant, color masterbatch or liquid stains.
|
4.Liquid coloring agent, the ingredients are not unified.
|
Check the send tubes for air jam, and check for slide screw.
|
5.Amount of difference in plastic.
|
Mixture of new material and material rendering to get rid of all "powder" and dust.
|
|